环氧地坪涂层批刮施工案例

宣布日期:2018-06-27 阅读次数:120

环氧地坪因其高强度、耐磨损等优良的机能,被人们普遍操纵。环氧地坪的的涂层批刮是环氧地坪施工中的关头部分。起首,咱们要晓得环氧树脂地坪批刮施工的目标是甚么?1、增厚,树脂涂层要到达用户请求的厚度;2、整型,经由进程涂层的批刮弥补地坪的坑洼。作为环氧地坪施工中首要一环的涂层批刮关键,只要掌握好它的每步,才能确保环氧地坪的品质,使主顾对劲。

Epoxy floor is widely used because of its high strength, wear resistance and other excellent properties. The batch scraping of epoxy floor coating is a key part in the construction of epoxy floor. First of all, we need to know the purpose of batch scraping construction of epoxy floor. 1. Thickening, resin coating to meet user requirements of thickness; 2. Shaping, through the batch scraping of the coating to fill the pits in the floor. As an important part of the construction of epoxy flooring, batch scraping of coating links can ensure the quality of epoxy flooring and satisfy customers only by grasping its every step.

第二、环氧树脂地坪的中涂批刮层须要停止多道批刮,并且每道批刮固化后常常须要停止打磨,这干系到下道工序的品质。

Secondly, the scraping layer of epoxy resin floor needs multi-pass scraping, and after each batch scraping and curing, it often needs grinding, which is related to the quality of the next process.

第三、涂层批刮层的打磨功课,传统上普通都操纵角向磨光机。

Thirdly, the angular polisher is traditionally used in the polishing of batch scraping coatings.

磨光机的操纵对环氧地坪的品质有很首要的感化,以是在操纵磨光机的时辰要注重防止下边这些题目:在施工进程中,操纵的工人停止下蹲式任务,休息强度大而任务效力低;因为角向磨光机在施工进程中很难与吸尘装备毗连,以是在施工进程中尘埃较大,对工人的安康有很大的风险;

The use of polisher plays an important role in the quality of epoxy floor, so we should pay attention to avoid the following problems when using polisher: in the construction process, the workers who operate squat work, labor intensity is high and work efficiency is low; because the angular polisher is difficult to connect with vacuum equipment in the construction process, so the dust in the construction process is large, and it will affect workers. Health is very harmful.

因为角向磨光机操纵的是串激式机电,负荷才能较差,在磨削时常常不能蒙受住与空中打仗的压力,轻易电流过大,形成机电的破坏野生操纵角向磨光机对空中停止磨削时,磨片与空中大多是部分打仗,如许轻易形成磨片受力不均,破坏过快,砂盘磨片的耗损量大的环境。

Because the angular polisher uses series excitation motor, its load capacity is poor, it can not bear the pressure of contact with the ground when grinding, and the current is too large. When the angular polisher is used to grind the ground by manual operation, the grinding disc contacts with the ground mostly locally, which easily causes uneven force on the grinding disc, excessive damage and large consumption of the grinding disc. The situation.

针对这类环境,一些施工职员想法在空中磨削机上装置砂磨片,对中涂批刮停止打磨。这不只处置了上述的题目,并且也进步了任务的效力。

In view of this situation, some constructors try to install abrasive discs on the ground grinder to polish the scraping of the middle coating batch. This not only solves the above problems, but also improves the efficiency of work.第四、用树脂沙浆搅拌机将树脂沙浆搅拌平均,将搅拌好的树脂沙浆用摊铺机按主顾请求的厚度摊于素地外表,而后再用抹平机抹平。

Fourth, mix resin mortar evenly with resin mortar mixer, spread the mixing resin mortar paver on the surface of plain surface according to the thickness required by customers, and then smoothed with a smoother. 

辛劳清算!转载请说明来自 http://elsmithint.com/show.asp?id=153

你感觉这篇环氧地坪涂层批刮施工案例文章怎样样?

0 0
在线征询
微信征询
接洽德律风
137-7148-9633
前往顶部